Philips Exprelia Evo Class Instructions d'exploitation télécharger pdf (Page 11)

4 5

INTENZA WATER FILTER - (OPTIONAL)

To improve the quality of the water you use and extend the life of your machine at the same time, it is recommended that you install the

water  lter. After installation, go to the water  lter initialization programme (see the "MACHINE MENU", page 27). In this way, the machine

informs the user when the water  lter must be replaced.

Remove the water  lter from its packaging, immerse it vertically (with the opening positioned upwards) in cold water and

gently press its sides to let the air bubbles out.

Remove the small white  lter from the

tank and store it in a dry place sheltered

from dust.

Insert the  lter in the empty tank. The

reference mark and the groove must

match. Push  rmly until it is completely

inserted.

Set up the Intenza Aroma System:

A = Soft water

B = Medium water (standard)

C = Hard water

Press the "OK" button. Press the "OK" button to con rm the

introduction of the new water  lter.

Press the "OK" button to con rm. Wait

until the cycle is completed and remove

the container.

Access the "MACHINE MENU" (see

page 27). Select "WATER MENU" and

"ACTIVATE FILTER", then press "OK".

NOTE: At the end of the procedure the display automatically returns to the product dispensing page.

If the Intenza water  lter is not available, insert the small white  lter previously removed (see point 1) into the tank.

Fill the tank with fresh drinking water up

to the "MAX" level and then place it back

into the machine.

Place a large container under the hot

water wand.

WATER MENU

ENABLE FILTER

ACTIVATE FILTER

ACTIVATE FILTER?

ESC

INSERT FILTER.

FILL THE TANK

PLACE A CONTAINER

UNDER THE

WATER SPOUT

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Philips Exprelia Evo Class Instructions d'exploitation Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Cafetières Philips Exprelia Evo Class