Philips 32-COLORTV W-PIP - Instructions d'exploitation télécharger pdf (Page 53)

Other Information

3 Adjust the angle of the Mounting Hook.

4 Align the holes on the right Mounting Hook with the corresponding holes on the rear of the

TV.

Secure them to the TV using two screws (supplied with SU-WL100).

Step 6: Installing the TV on the Base Plate

Refer to the Instructions for SU-WL100.

1 Connect the cables to the corresponding inputs on the rear of the TV.

For details on the cable connection, see “Connecting Other Equipment” on page 13.

2 Install the TV onto the Base Plate.

Mounting Hook

Arm

Screw

(+PSW 4 × 12)

Mounting Hook

• When using an electric screwdriver to tighten the screws, the torque must be approximately

1.5 N·m {15 kgf·cm}. Do not lift the Mounting Hook before the screws (two screws each for

left /right) are secured.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

Pas de commentaire

Philips 32-COLORTV W-PIP - Instructions d'exploitation Page 53