Philips MC-320-37 Manuel d'utilisateur télécharger pdf (Page 18)

Tape Operation / Recording

Synchro start CD recording

Select CD source.

Insert a disc and if desired, program track

numbers.

Press A to open the tape door.

Insert a suitable tape into the deck and close the

tape door.

Press REC to start recording.

REC is shown during recording.

Playing of the CD program starts

automatically from the beginning of the CD

after 7 seconds. It is not necessary to start the

CD player separately.

6 To stop recording, press STOP I

Recording from the radio

Select TUNER source and tune to the desired

radio station (see "Tuning to radio stations").

Press A to open the tape door

Insert a suitable tape into the deck and close the

tape door.

Press REC to start recording.

REC is shown during recording.

To stop recording, press STOP ■.

Recording from Aux

1 Select AUX source.

2 If necessary, prepare the additional appliance for

recording,

3 Press REC to start recording.

REC is shown during recording.

4 To stop recording, press STOP ■.

Recording timer

To record from the radio, you will need to use a

preset radio station and to set a start (ON) and

finish (OFF) time.

1 Insert a suitable tape into the deck.

If desired, press REV to select tape reverse

mode option.

PLAY 1 SIDE : for recording one side only

PLAY A AND B ; for recording on both sides

REPEAT A AND B : for recording on both sides

2 Select TUNER SOURCE and the preset radio

station to record from,

3 Press STANDBY ON to switch the system to

standby mode. Press TIMER SET /1< for more

than 2 seconds.

O flashes and a source is displayed.

4 Press SOURCE repeatedly, until RECTUM

source is displayed.

5 Press TIMER SET /1< to confirm the source.

SET uff f I"1T is displayed, and the clock

digits for the hours flash.

6 Press VOLUME -/+ to set the hours.

7 Press TIMER SET/1< again.

The clock digits for the minutes flash.

8 Press VOLUME -/+ to set the minutes.

9 Press TIMER SET /1< to confirm the ON start

time,

-k O.CT

OLI nrr I If iT is displayed, 0 and the

T "TTmC

clock digits for the hours flash.

10 Repeat steps 6-8 to set the finish time.

11 Press TIMER SET /Kto confirm the timer

settings.

0; is shown and the recording timer is now

set.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Philips MC-320-37 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Vidéo Philips MC-320-37