Philips FMod-TCP BOX Manuel d'utilisateur télécharger pdf (Page 5)

5 / 58

1 Package and operating conditions

Starter Kit contents

The FMod-TCP BOX “Starter kit” should contain:

 FMod-TCP BOX device

 RS232 DSub cable

 DIN 41651 40 lines cable

 CD-Rom with dedicated software and Java applet sample

 This manual

Absolute maximum rating

Damage may occur if the device is operated using values beyond those

mentioned below; device operation is not guaranteed.

Preliminary

Parameter Conditions Min Typ Max Unit

Supply voltage 0 24 33 V

Supply current No device connected to extension

connector.

60 100 mA

Supply current Device(s) connected to extension

connector.

3 A

Outputs 1, 2 current Relays. 1 A

Outputs 1, 2 voltage Max voltage to GND. 50 V

Outputs 3-14 current 0.5 A

Outputs 15, 16 current 1 A

Inputs voltage -15 28 V

+5V output current Pin 17 on extension connector. 0.4 A

Power output current Pin 40 on extension connector. 1 A

Operating temperature 0 70 °C

Storage temperature -40 120 °C

All external pins are protected against destruction by ESD (2kV).

The power supply input is protected against over and inverted voltage by a

33V Zener diode. The protection is guaranteed during 10ms within the

following current values:

 For inverted voltage: 100A (the internal polifuse will cut the supply).

 For over voltage: 3.25A max (the diode will be destroyed before the

fuse after 10ms!).

Damages to the device due to over or inverted voltage are not covered by

the warranty.

FMod-TCP User Manual v.2.8

1 2 3 4 5 6 7 8 9 10 ... 57 58

Pas de commentaire

Philips FMod-TCP BOX Manuel d'utilisateur Page 5