Philips GC3593 Manuel d'utilisateur télécharger pdf (Page 9)

3 Put the mains plug in an earthed wall socket.

, The amber temperature light goes on (Fig. 6).

4 When the temperature light goes out, wait a while before you

start ironing.

The temperature light goes on from time to time during ironing.

Using the appliance

Note: The iron may give off some smoke when you use it for the rst time.

This stops after a short while.

Steam ironing

1 Make sure that there is enough water in the water tank.

2 Set the recommended ironing temperature (see chapter

‘Preparingforuse’,section‘Settingthetemperature’).

3 Set the appropriate steam setting. Make sure that the steam

setting is suitable for the set ironing temperature: (Fig. 7)

- 1 - 2 for moderate steam (temperature settings 2 to 3)

- 3 - 4 for maximum steam (temperature settings 3 to MAX)

Note: The iron starts to produce steam as soon as it has reached the

set temperature.

Note: If the selected ironing temperature is too low (MIN to 2), water may

drip from the soleplate (see chapter ‘Features’, section ‘Drip stop’).

Ironing without steam

1 Set the steam control to position 0 (= no steam) (Fig. 3).

2 Set the recommended ironing temperature (see chapter

‘Preparingforuse’,section‘Settingthetemperature’).

ENGLISH 9

4239_000_8219_2_DFU Booklet_A6_v1.indd 9 18/07/14 14:06

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 191 192

Pas de commentaire

Philips GC3593 Manuel d'utilisateur Page 9