Philips GC4218 Mode d'emploi télécharger pdf (Page 8)

Electronic safety shut-off function (types GC4243, GC4238

and GC4233 only)

1 The electronic safety shut-off function automatically switches

off the iron if it has not been moved for a while.

◗ The red auto-off pilot light starts blinking to indicate that the iron

has been switched off by the safety shut-off function.

To let the iron heat up again:

- Pick up the iron or move it slightly.

- The red auto-off pilot light goes out. If the temperature of the

soleplate has dropped below the set ironing temperature, the amber

temperature pilot light goes on.

- If the amber pilot light goes on after you have moved the iron, wait

for it to go out before you start ironing.

- If the amber pilot light does not go on after you move the iron, the

soleplate still has the right temperature and the iron is ready for use.

Alert light

◗ Types GC4243 and GC4238 only:

- The iron is equipped with a blue alert pilot light.

- The blue alert light burns as long as the iron is plugged in, even if the

iron has been switched off by the safety shut-off function.

Cleaning and maintenance

Using the calc-clean function

You can use the calc-clean function to remove scale and impurities.

◗ Use the calc-clean function once every two weeks. If the water in

your area is very hard (i.e. when flakes come out from the

soleplate during ironing), the calc-clean function should be used

more frequently.

1 Set the steam control to position O.

2 Fill the water tank to the maximum level.

ENGLISH8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 127 128

Pas de commentaire

Philips GC4218 Mode d'emploi Page 8